TZ
Tz belt is simply chains connected by thick connecting rods on either side. This belt is oftenly used where no wire mesh is required. It is also possible to give a radius to this belt by connecting rods to chain with different pitch ( step ) dimensions.
TZ - Technical Drawing ( Chain Driven Mesh Conveyor Belt)
TZ - Dimensions: ( Chain Driven Mesh Conveyor Belt)
| C: Rod Pitch | S: Rod Diameter |
| 9,525mm | 3 |
| 12,7mm | 4 |
| 15,875mm | 4,85 |
| 19,05mm | 5 |
| 25,4mm | 4 8 |
| 31,75mm | 4 8 |
| 50,8mm | 8 12 |
Types: Chain Driven Mesh Conveyor Belt
TBZ1
TBZ-1 belt has right and left-hand spirals connected by bended (crimped) cross rods. These right and left-hand wire spirals allow the belt to be well-balanced and to maintain its straightness and have perfect strenght-weight ratio.
TBZ2
TBZ-2 belt has right-and left-hand spirals ( 2 rods in 1 spiral ) fitted closely for a smooth, dense weave. It is excellent for conveying small products while allowing air flow for baking, drying&cooling or roasting purposes.
TBZ3
TBZ-3 belt has right-and left-hand spirals ( 3 rods in 1 spiral ) fitted closely for a smooth, dense weave. It is excellent for conveying very fine or small products. This belt type model provides a closed mesh surface that is extremely strong, flat and supportive.
TBBZ
TBBZ belts consists of only left and right spirals twisted into one another. The ends of the spirals are either welded or bended.